Step 1:
Click on the link to download the .pdf template for the pop-up Rabbit:
Step 2:
Print out both pages from the template onto heavy paper, such as card stock or construction paper.
Step 3:Using a ruler as a guide, take the rounded end of a paper clip (or a ballpoint pen that has run out of ink) and press along the dotted lines of the rabbit piece. Do the same thing along the dotted line of the card.
|
Step 4:Carefully cut out the card following the solid, black lines.
|
Step 5:Carefully cut out the rabbit following the solid, black lines.
|
Step 6:Fold the rabbit in half along the center dotted line and crease.
|
Step 7:Apply a small amount of white glue at the area marked "Glue Here".
|
Step 8:Bring the left leg forward, along its fold, and press into the glue. Let dry.
|
Step 9:Take a hold of rabbit's tail...
|
Step 10:...and fold it over along its dotted line.
|
Step 11:Open the tail back out again to its original position.
|
Step 12:Take a hold of rabbit's paws...
|
Step 13:...and fold them over along their dotted line.
|
Step 14:Open the paws back out again to their original position, Set the rabbit aside.
|
Step 15:Take the card and fold along the center dotted line creasing it...
|
Step 16:...untle it is completely folded in half. Open the card again.
|
Step 17:Apply a small amount of glue to the areas marked "Glue Here".
|
Step 18:Match up the rabbit's tail and paws over the glue areas.
|
Step 19:Press the rabbit on to the glue areas...
|
Step 20:...and press firmly. Let dry!
|
Step 21:When the glue is dried, slowly begin...
|
Step 22:...to close the card.
|
Step 23:Your White Rabbit is finished! Decorate with crayons, colored pencils or markers.
|