Step 3:Using a ruler as a guide, take the rounded end of a paper clip (or a ballpoint pen that has run out of ink) and press along the dotted lines of the pop-up pieces and card.
|
Step 4:Carefully cut out your bug pop-up pieces and card following the solid black line around the shapes. When you're done you should have 5 pop-up pieces and 1 card.
|
Step 5:Take your card and fold it in half. Unfold and put it back to its original position.
|
Press the tab down firmly and allow the glue to dry.
|
Repeat step 20 & 21 on the right side.
|
Step 22:Wait until the glue is dry. Then, as a test, carefully close the card to make sure the legs are moving correctly. You can give them a little help with your fingers if they're stuck in their flat position.
|
Step 23:Press everything flat and apply a small amount of glue to all of upper tabs on the left.
|
Step 24:Fold the body piece in half and line its head up with the head-shaped tabs at the top. Make sure the middle fold of the body lines up with the middle fold of the card.
|
Press the left side down firmly, making sure that all the tabs underneath are sticking to the underside of the body.
|