| Pop-up Ark! |
 |
 |
 |
 |
 |
Step 21:
Lay the pop down and press the tab into the glue.
|
Step 22:
Put a small amount of glue on the reaming area marked "Glue here."
|
Step 23:
Fold that piece over onto the remaining tab on the ark and press the glue. Let dry!
|
|
 |
 |
 |
Step 24:
Fold the card in half along the dotted line and crease. Open the card.
|
Step 25:
Put a small amount of glue on the area marked "Glue here" on the RIGHT SIDE only.
|
Step 26:
Pick up the pop (with the bird at the top) and fold the RIGHT water tab backwards so it matches the position of the glue area. Look carefully at this picture and the picture in Step 27 so you’ll understand how to attach the pop to the glue area. Press the tab into the glue area.
|
|
 |
 |
 |
Step 27:
Flip the pop-up over and fold back the other tab shaped like water and crease.
|
Step 28:
Put a small amount of glue on the remaining area marked "Glue here."
|
Step 29:
Making sure the pop is laying completely flat against the card, begin to fold the card closed.
|
|
 |
 |
Step 30:
Close the card completely. Press on the card to make sure the glue area on the inside is adhering to the tab. LET DRY! Don’t open the card right away or the pop-up will come unglued!
|
Step 31:
Your pop-up ark is finished! Happy sailing!
|
